Today I’m going to show you how to sew your bias binding around curves. This is really great if you have a scalloped hemline on a top, skirt, sleeves or want a decorative edge on tea towels, cushions and other craft items.
This is the last sewing tip in my 5 Part series on sewing bindings. If you want to view the other 4 posts please click on the links below:
This is the last sewing tip in my 5 Part series on sewing bindings. If you want to view the other 4 posts please click on the links below:
So let’s get started!
Sew your bias pieces together. Cut away the corners and then iron.
Get your scalloped piece of fabric ready….
With the right side of the bias piece next to the wrong side of the scalloped piece sew a seam 6mm/1/4″ in from the edge.
Continue sewing till you get to the inner curve point of the scalloped edge. With the needle still in the fabric lift the foot up and pivot the foot to be in line with the outer curve. Continue sewing like this to the end.
This is how the first stage of sewing on your bias piece will look.
Turn the scalloped piece of fabric over to the right side and fold the bias piece over twice and pin down making sure you are covering the previous stitching.
Stitch the bias piece down sewing on the inside edge. When you get to the inner curve point make sure the needle is in the fabric before you lift the foot and turn to be in line with the outer curve. Continue sewing like this to the end.
Voila! you are done! You’ve just finished adding a bias binding trim to a curved edge. Now go and create some more!
I hope you enjoyed this 5 Part series on attaching different bias bindings. If you have any questions please don’t hesitate to email me and I can help you out.
I’ll be putting more tutorials together in the future but if there is something you would like to know ‘how to do’ please let me know in the comments below or by email and I’ll put together a tutorial for you.
